數字探針溫度計是一種測量中低溫度的現場檢測儀表??梢灾苯訙y量各種生產過程中的-80℃-+500℃范圍內液體蒸汽和氣體介質溫度。主要的元件是一個用兩種或多種金屬片疊壓在一起組成的多層金屬片,利用兩種不同金屬在溫度改變時膨脹程度不同的原理工作的。是基于繞制成環性彎曲狀的雙金屬片組成。一端受熱膨脹時,帶動指針旋轉,工作儀表便顯示出熱電勢所應的溫度值。
數字探針溫度計是將繞成螺紋旋形的熱雙金屬片作為感溫器件,并把它裝在保護套管內,其中一端固定,稱為固定端,另一端連接在一根細軸上,成為自由端。在自由端線軸上裝有指針。當溫度發生變化時,感溫器件的自由端隨之發生轉動,帶動細軸上的指針產生角度變化,在標度盤上指示對應的溫度。
數字探針溫度計的安裝要點:
1、溫包的安裝
數字探針溫度計的溫包應全部插人被測介質中,如果安裝在管道上,應將溫包長度的一半處于管道中間線;
而且應是自上而下垂直安裝。
若被測介質對溫包材料有強烈腐蝕性,則應將溫包裝在護套管中。
2、毛細管安裝
毛細管應遠離熱源或冷源安裝,且安裝時應引直不應打折。
3、指示部分安裝
(1)指示部分高度位置應與溫包一致,否則進行調零修正;
(2)周?chē)h(huán)境溫度應較穩定,不低于5攝氏度和高于60攝氏度;
(3)周?chē)h(huán)境不應有大量粉塵和對儀表有腐蝕性氣氛;
(4)不應安裝在強烈震動場合,否則應加減震裝置。